# Firmware Update Required for Muscle SpikerBox Pro and Neuron SpikerBox Pro Boards to Work with the New Spike Recorder 4.0 App

**URL:** <https://forum.backyardbrains.com/t/firmware-update-required-for-muscle-spikerbox-pro-and-neuron-spikerbox-pro-boards-to-work-with-the-new-spike-recorder-4-0-app/151>\
**Category:** Software\
**Created:** [November 20, 2026, 8:29pm UTC](https://forum.backyardbrains.com/t/firmware-update-required-for-muscle-spikerbox-pro-and-neuron-spikerbox-pro-boards-to-work-with-the-new-spike-recorder-4-0-app/151 "2026-11-20T20:29:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![marija](https://forum.backyardbrains.com/user_avatar/forum.backyardbrains.com/marija/32/57_2.png) [@marija](https://forum.backyardbrains.com/u/marija)\
**Post date:** [November 20, 2026, 8:29pm UTC](https://forum.backyardbrains.com/t/firmware-update-required-for-muscle-spikerbox-pro-and-neuron-spikerbox-pro-boards-to-work-with-the-new-spike-recorder-4-0-app/151/1 "2026-11-20T20:29:25Z")

</div>

Hello Backyard Brains Community!

If you have an older **Muscle SpikerBox Pro** or **Neuron SpikerBox Pro** and are having trouble connecting it to the latest version of **Spike Recorder** , we have a solution!

Older SpikerBox Pro boards use an HID USB connection, while the new Spike Recorder app uses a CDC serial USB connection.

The good news is that **you don’t need a new board!** A simple firmware update will make your existing SpikerBox Pro compatible with the latest app.

### How to Update Your SpikerBox Pro

1. **Download the latest Spike Recorder app** for Windows or macOS from [backyardbrains.com](https://backyardbrains.com/app/spikerecorder).

2. Connect your SpikerBox Pro to your computer via USB, and turn on the device.

3. Open Spike Recorder and navigate to **Settings**.

4. Enable **“Find old SpikerBox Pro boards”**.

 ![Find Old SpikerBox Pro Boards](https://forum.backyardbrains.com/uploads/default/original/1X/bec46122ea204c658c73ed08c5a7ad83cc160edf.png)

1. Make sure your SpikerBox Pro is **powered ON** , preferably with a fresh battery.

2. Once the board is detected, proceed with the **firmware update**. This should take approximately **10 seconds**.

3. You’re all set! Your SpikerBox Pro should now work with the latest Spike Recorder app on all supported platforms.

**Important:** Keep your board powered ON and connected during the entire update process.

### Need Help?

If your SpikerBox Pro isn’t connecting or you encounter any issues during the update, feel free to leave a comment below or contact our support team.

We’re happy to help you get your SpikerBox Pro up and running again!

**Happy experimenting! 🧠⚡**

The Backyard Brains Team
